Table 28: Show Radius Servers Output Fields - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide
-------------
-------------
192.168.30.16
192.168.30.17
192.168.30.18
Table 28 on page 142 lists the show radius servers command output fields.
Meaning

Table 28: show radius servers Output Fields

142
Monitoring RADIUS Server Information
------------- ---- -----
172.28.30.117 1813 3
172.28.30.118 1813 3
172.28.30.119 1813 3
RADIUS Pre-Authentication Configuration
---------------------------------------
Udp Retry
IP Address Port Count
---- -----
172.28.30.117 1812 3
172.28.30.118 1812 3
172.28.30.119 1812 3
RADIUS Route-Download Configuration
-----------------------------------
Udp Retry
IP Address Port Count
---- -----
1812 3
1812 3
1812 3
Field Name
IP Address
Udp Port
Retry Count
Timeout
Maximum Sessions
Dead Time
Secret
------- -------- ----
3 255 30
3 255 30
3 255 30
Maximum Dead
Timeout Sessions Time
------- -------- ----
3 255 30
3 255 30
3 255 30
Maximum Dead
Timeout Sessions Time
------- -------- ----
3 255 30
3 255 30
3 255 30
Field Description
IP address of RADIUS server
Number of the UDP port of the RADIUS server
Maximum number of times that the router retransmits a
RADIUS packet to the RADIUS server
Interval (in seconds) before the router retransmits a
RADIUS packet to the RADIUS server
Number of outstanding requests to the RADIUS server
Amount of time to remove the authentication server or
accounting server from the available list when a timeout
occurs
Configured authentication server or accounting server
secret
------ ------
radius dead
radius active
radius alive
Secret Status
------ ------
radius dead
radius active
radius alive
Secret Status
------ ------
radius dead
radius active
radius alive