Defining Cos Rewrite Rules (J-Web Procedure) - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Related
Documentation

Defining CoS Rewrite Rules (J-Web Procedure)

Table 420: Rewrite Rules Configuration Page Summary
Field
Rewrite Rule Name
Rewrite rule type
Copyright © 2010, Juniper Networks, Inc.
To enable an 802.1p rewrite rule named customup-rw on all Gigabit Ethernet interfaces
on the switch, use wildcards for the interface name and logical-interface (unit) number:
[edit]
user@switch# set class-of-service interfaces ge-* unit * rewrite-rules customup-rw
Defining CoS Rewrite Rules (J-Web Procedure) on page 3217
Example: Configuring CoS on EX Series Switches on page 3173
Monitoring CoS Rewrite Rules on page 3230
Understanding CoS Rewrite Rules on page 3163
You can use the J-Web interface to define CoS rewrite rules. Use the rewrite rules to alter
the CoS values in outgoing packets to meet the requirements of the targeted peer. A
rewrite rule examines the forwarding class and loss priority of a packet and sets its bits
to a corresponding value specified in the rule.
To define rewrite rules:
Select
1. Configure > Class of Service > Rewrite Rules
NOTE: After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select Commit Options > Commit.
See Using the Commit Options to Commit Configuration Changes for
details about all commit options.
Click one:
2.
Add —Adds a rewrite rule. Enter information into the rewrite rule page as described
in Table 420 on page 3217.
—Modifies an existing rewrite rule. Enter information into the rewrite rule page
Edit
as described in Table 420 on page 3217.
Delete —Deletes an existing rewrite rule.
Function
Specifies the name for the rewrite rule.
Specifies the type of rewrite rule:
, or
ieee-802.1 inet-precedence
Your Action
To name a rule, type the name—for example,
rewrite-dscps
, Select a value from the list.
dscp
.
Chapter 109: Configuring CoS
.
.
3217