Show Ip Access-Lists; Show Access-Lists - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

show ip access-lists

This command displays an IP ACL <
Format
Modes
Rule Number
Action
Protocol
Source IP Address
Source IP Mask
Source Ports
Destination IP Address
Destination IP Mask
Destination Ports
Service Type Field Match
Service Type Field Value

show access-lists

This command displays IP ACLs and MAC access control lists information for a designated
interface and direction.
Format
Modes
ACL Type
ACL ID
Sequence Number
10-8
accesslistnumber
>
show ip access-lists <accesslistnumber>
Privileged EXEC
This displays the number identifier for each rule that is defined for the
IP ACL.
This displays the action associated with each rule. The possible values
are Permit or Deny.
This displays the protocol to filter for this rule.
This displays the source IP address for this rule.
This field displays the source IP Mask for this rule.
This field displays the source port for this rule.
This displays the destination IP address for this rule.
This field displays the destination IP Mask for this rule.
This field displays the destination port for this rule.
This field indicates whether an IP DSCP, IP Precedence, or IP TOS
match condition is specified for this rule.
This field indicates the value specified for the Service Type Field
Match (IP DSCP, IP Precedence, or IP TOS).
show access-lists interface <slot/port> in
Privileged EXEC
Type of access list (IP or MAC).
Access List name for a MAC access list or the numeric identifier for an
IP access list.
An optional sequence number may be specified to indicate the order of
this access list relative to other access lists already assigned to this inter-
face and direction. A lower number indicates higher precedence order. If
a sequence number is already in use for this interface and direction, the
specified access list replaces the currently attached access list using that
202-10102-01, May 2005
is the number used to identify the IP ACL.
Quality of Service (QoS) Commands