Show Sysinfo; Config Sysname; Config Syslocation - NETGEAR GSM7324 Reference Manual

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Machine Type
Burnedin MAC Address
Software Version

show sysinfo

This command displays switch information.
Format
Switch Description
System Name
System Location
System Contact
System ObjectID
IP Address
System Up Time
MIBs Supported

config sysname

This command sets the name assigned to the switch.The range for name is from 1 to 31
alphanumeric characters.
Default
Format

config syslocation

This command sets the physical location of the switch. The range for name is from 1 to 31
alphanumeric characters.
Default
Format
7-2
Specifies the machine model as defined by the Vital Product
Data.
Universally assigned network address.
The release.version.revision number of the code currently run-
ning on the switch.
show sysinfo
Text used to identify this switch.
Name used to identify the switch.
Text used to identify the location of the switch. May be up to 31
alpha-numeric characters. The factory default is blank.
Text used to identify a contact person for this switch. May be up
to 31 alpha-numeric characters. The factory default is blank.
The base object ID for the switch's enterprise MIB.
The IP address currently assigned to the switch.
The time in days, hours and minutes since the last switch reboot.
A list of MIBs supported by this agent.
Blank
config sysname <name>
Blank
config syslocation <location>
May 30, 2003 Beta Draft
Switching Commands