Show Ip Interface Brief - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Link Speed Data
Rate
MAC Address
Encapsulation
Type
IP MTU

14.2.13 show ip interface brief

This command displays summary information about IP configuration settings for all ports
in the router.
Format
Modes
Interface
IP Address
IP Mask
Netdir Bcast
MultiCast Fwd
Routing Commands
Is an integer representing the physical link data rate of the
specified interface. This is measured in Megabits per second
(Mbps).
Is the burned in physical address of the specified interface.
The format is 6 two-digit hexadecimal numbers that are sepa-
rated by colons.
Is the encapsulation type for the specified interface. The
types are: Ethernet or SNAP.
Displays the maximum transmission unit (MTU) size of a
frame, in bytes.
show ip interface brief
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
The IP address of the routing interface in 32-bit dotted deci-
mal format.
The IP mask of the routing interface in 32-bit dotted decimal
format.
Indicates if IP forwards net-directed broadcasts on this inter-
face. Possible values are Enable or Disable.
Indicates the multicast forwarding administrative mode on
the interface. Possible values are Enable or Disable.
v1.0, December 2005
14-15