Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IP Address
Subnet Mask
Routing Mode
Administrative Mode
Forward Net Directed Broadcasts Displays whether forwarding of network-directed
Active State
Link Speed Data Rate
MAC Address
Encapsulation Type
show ip interface brief
This command displays summary information about IP configuration settings for all ports in the
router. This command takes no options.
Format
Mode
Slot/Port
IP Address
IP Mask
9-38
Is an IP address representing the subnet configuration of the
router interface. This value was configured into the unit.
Is a mask of the network and host portion of the IP address for the
router interface. This value was configured into the unit.
Is the administrative mode of router interface participation. The
possible values are enable or disable. This value was configured
into the unit.
Is the administrative mode of the specified interface. The possible
values of this field are enable or disable. This value was config-
ured into the unit.
broadcasts is enabled or disabled. This value was configured into
the unit.
Displays whether the interface is active or inactive. An interface
is considered active if its link is up and it is in forwarding state.
Is an integer representing the physical link data rate of the speci-
fied interface. This is measured in Megabits per second (Mbps).
Is the burned in physical address of the specified interface. The
format is 6 two-digit hexadecimal numbers that are separated by
colons.
Is the encapsulation type for the specified interface. The types
are: Ethernet or SNAP.
show ip interface brief
Privileged EXEC and User EXEC
The interface being displayed on the row.
The IP address of the routing interface in 32-bit dotted decimal
format.
The IP mask of the routing interface in 32-bit dotted decimal for-
mat.
202-10009-01_060204
Routing Commands
Advertisement
Table of Contents
