no lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner.
Format
no lacp partner admin key <key>
Mode
Interface Config
lacp partner admin state individual
Use this command to set LACP partner admin state to individual.
Format
lacp partner admin state individual
Mode
Interface Config
Note:
This command is only applicable to physical interfaces.
no lacp partner admin state individual
Use this command to set the LACP partner admin state to aggregation.
Format
no lacp partner admin state individual
Mode
Interface Config
lacp partner admin state longtimeout
Use this command to set LACP partner admin state to longtimeout.
Format
lacp partner admin state longtimeout
Mode
Interface Config
Note:
This command is only applicable to physical interfaces.
no lacp partner admin state longtimeout
Use this command to set the LACP partner admin state to short timeout.
Format
no lacp partner admin state longtimeout
Mode
Interface Config
Note:
This command is only applicable to physical interfaces.
ProSafe Managed Switch
Switching Commands
109