Lacp Partner Admin Key; Lacp Partner Admin State Individual - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

no lacp actor system priority
Use this command to configure the priority value associated with the Actor's SystemID.
Format
no lacp actor system priority
Mode Interface Config

lacp partner admin key

Use this command to configure the administrative value of the Key for the protocol partner. The
valid range for <key> is 0 to 65535.
Default 0x0
Format
lacp partner admin key
Mode Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner.
Format
no lacp partner admin key <key>
Mode Interface Config

lacp partner admin state individual

Use this command to set LACP partner admin state to individual.
Format
lacp partner admin state individual
Mode Interface Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-97