Novell NETWARE 6-DOCUMENTATION Manual page 2308

Modifying an Object's Auxiliary Properties
Screen
Extensions tab
New dialog box
6
Click OK.
1
In the main ConsoleOne window, right-click the object > click Properties.
2
On the Extensions tab, select the property page that's named after the
auxiliary class. If the auxiliary class isn't listed or if there's no Extensions
tab, use the generic Other page.
3
On the screen that appears, set the property values you want. Depending
on which screen you're using, note the following:
Screen
Extensions tab
Other tab
4
Click OK.
Notes
Both mandatory and optional properties of the
auxiliary class might be listed.
Click Help for details on specific properties.
Only mandatory properties of the auxiliary class
are listed.
You must know the syntax of a property to set it
correctly. For details, see Novell eDirectory
Administration Guide > Schema.
After setting the mandatory properties, you can set
optional properties as explained below. You'll have
to modify the objects one at a time.
Notes
Both mandatory and optional properties of the
auxiliary class might be listed.
Click Help for details on specific properties.
Only the properties of the auxiliary class that have
already been set are listed. Click Add to set
additional properties.
You must know the syntax of a property to set it
correctly. For details, see Novell eDirectory
Administration Guide > Schema.
Extending the Novell eDirectory Schema
75