Novell NETWARE 6-DOCUMENTATION Manual page 2307

Extending Multiple Objects Simultaneously with the Properties of an
Auxiliary Class
74
ConsoleOne User Guide
1
In the ConsoleOne right pane, Shift+click or Ctrl+click the objects to
select them.
The objects don't have to be the same type.
2
Right-click your selection > click Extensions of Multiple Objects.
3
Depending on whether the auxiliary class that you want to use is already
listed under Current Auxiliary Class Extensions, complete the
appropriate action:
HINT:
Only those extensions that are common to all the selected objects are
listed. Those that are specific to individual objects aren't listed.
Auxiliary Class Is
Already Listed?
Yes
No
4
If a message appears stating that generic editors will be used, click OK.
5
On the screen that appears, set the property values you want.
IMPORTANT:
Each property value you set will be applied to each selected object.
If the property already exists in the object and is single-valued, the existing value
will be replaced. If the property already exists and is multi-valued, the new values
will be added to the existing values.
Depending on which screen you're using, also note the following:
Action
Quit this procedure.
See instead "Modifying an Object's Auxiliary Properties"
on page 75. You'll have to modify the objects one at a
time.
Click Add Extension > select the auxiliary class > click
OK.