Novell NETWARE 6-DOCUMENTATION Manual page 2316

Using the Partition Continuity Table
You might also see icons representing unreadable replicas. This does not
necessarily signify that the servers can't talk.It might simply indicated that the
client cannot contact the server for information.
You can check partition continuity in ConsoleOne from the Partition and
Replica View.
1
Click View > Partition and Replica View.
2
Select the partition whose synchronization status you want to view.
3
Click Partition Continuity
You can use the Partition Continuity table for doing the following:
"Viewing Replica Information" on page 83
"Viewing Server Informations" on page 83
"Synchronizing Replica Information" on page 84
"Receiving Updates" on page 84
"Sending Updates" on page 84
Viewing Replica Information
From the Partition Continuity Table, you can view information about a replica,
such as its type, current state, and any synchronization errors.
1
Select a row in the Partition Continuity Table.
2
Click View > Information > Replica.
3
Select the replica (column) you want to view.
4
Click OK.
You can also double-click the replica icon in the table to view replica
information.
Viewing Server Informations
From the Partition Continuity Table, you can view information about a server
and the replicas it holds.
1
Select a row in the Partition Continuity Table.
2
Click View > Information > Server.
You can also double-click the server column in the table to view server
information.
.
Partitioning and Replicating Novell eDirectory
83