Novell NETWARE 6-DOCUMENTATION Manual page 2451

Using ADD NAME SPACE
Additional Information
AIOCON
Purpose
AIOPDCON
Purpose
You need to add a name space only once to a volume with the ADD
NAME SPACE command.
Each time you mount a volume to which you added a name space (for
example, each time you bring up the server), the corresponding name
space module is autoloaded.
NOTE:
Because you don't need to add a name space to a volume each time the
server comes up, you don't need to put the ADD NAME SPACE command in the
autoexec.ncf file.
When name space support is added to a volume, another entry is created
in the directory table for the directory and file naming conventions of that
name space (file system).
Topic
Adding name space support
Configure low-level port information. You can use this utility by loading
NIASCFG and following this path:
Select Configure NIAS > Remote Access > Configure Ports
Create Packet Assembler Disassembler (PAD) profiles used to configure PAD
parameters for X.25 connections. You can use this utility by loading
NIASCFG and following this path:
Select Configure NIAS > Remote Access > Set Up... > Configure AIOPAD
Parameters
See
Adding a Name Space
13
Utilities