Novell NETWARE 6-DOCUMENTATION Manual page 2387

Accessing NetWare Remote Manager
14
NetWare Remote Manager Administration Guide
To access NetWare Remote Manager, complete the following:
1
Open the Web browser at your workstation.
2
Point the browser to the URL of the server you want to manage by
entering the following in the address (URL) field:
http://server's TCP/IP address
For example:
http://137.65.123.11
If you have Domain Name Services (DNS) installed on your network for
server name-to-IP address resolution, you can also enter the server's DNS
name instead of the IP address.
If the NetWare Enterprise Web Server or some other service that is using
port 80 is installed on your server, you need to add the alternate port
number 8008 at the end of the IP address to log in to NetWare Remote
Manager. For example, if your server's IP address is 137.65.123.11, you
would enter 132.65.123.11:8008 in the address field of your browser.
NOTE:
The default alternate port number is 8008. If you have changed this value
on the Configuration page, make sure you enter the new port number.
If you want to access NetWare Remote Manager from the outside of a
firewall and the server's private address is unreachable except through
Network Address Translation (NAT) or by proxy, do the following:
Ensure that DNS is configured on your server.
Change the load line for loading the HTTPSTK.NLM to the
following in the AUTOEXEC.NCF file:
LOAD HTTPSTK.NLM /HOSTIDS:1 /SSL /KEYFILE:"SSL
CERTIFICATEIP"
3
Accept the SSL certificate.
IMPORTANT:
You must have SSL 2.0 and SSL 3.0 (where available) enabled in
your browser. Otherwise, the browser will display an error indicating that the page
cannot be displayed.
4
When the login dialog box from your browser appears, enter the required
information.
To have access to all pages necessary to manage your server remotely, log
in as a user with the Supervisor right to the Server object, usually user
Admin or a user with rights equivalent to user Admin.