Alcatel Omni Switch/Router User Manual page 566

Creating a New Group
k. After selecting to enable
Enter the
a minimum of one hex digit in this field. If you enter less than eight hex digits, the system
prefixes your entry with zeros to create eight digits.
l.
The following prompt displays:
Enter a useful description for this virtual
The description may be up to 30 characters long. Press
m. The following prompt displays:
Enter the number of ticks you want for the IPX network. A tick is about 1/18th of a
second. The default is 0.
n. The following prompt displays:
Select how you want the
access protocol), to be configured for the default
layer protocol that enables this
that allows network services, such as print and files services, to advertise themselves. The
choices are:
attached participates in both
received through this router port. Simply press
updates only.
RIP
and press
attached does not participate in either
select
RIP
Page 19-24
, the following prompt displays:
IPX
network address.
IPX IPX
protocols,
IPX
VLAN
. The default setting. The default
and
RIP
The default to which this
VLAN
.
updates are sent and received through this router port. Enter an
RIP
to select only active.
RIP
The router port is active, but the default
. IPX
and inactive.
SAP
addresses consist of eight hex digits and you can enter
router port using alphanumeric characters.
IPX
(router information protocol) and
RIP
in this Group.
VLAN
to learn routes. is also a network-layer protocol
SAP
to which this
VLAN
. and
SAP updates RIP SAP
to select
router port is attached participates in
IPX
nor . Enter an and press
RIP SAP updates
.
(service
SAP
is a network-
RIP
router port is
IPX
updates are sent and
and active.
RIP SAP
to which it is
VLAN
to