Omni Switch/Router Port Test Wrap Cable/Plug Requirements - Alcatel Omni Switch/Router User Manual

Running Hardware Diagnostics
The table below provides specific cable/plug information for Omni Switch/Router switching
modules.

Omni Switch/Router Port Test Wrap Cable/Plug Requirements

Module Type
GSX-K-FM-2W
GSX-K-FS-2W
ESX-K-100C-32W
ESX-K-100FM-16W
ESX-K-100FS-16W
Page 36-10
Cable Type
Port/Stress (Full Duplex) test: Multi-mode fiber optic wrap plug
with SC connectors.
Port/Stress (Half Duplex) test: Multi-mode fiber optic cable with
SC connectors.
Port (Full and Half Duplex) and Stress tests: Single-mode fiber
optic cable with SC connectors.
Port/Stress (Full Duplex) test: ESX Wrap Plug.
Refer to ESX Wrap Plug – RJ-45 Connector on page 36-22.
Port/Stress (Half Duplex) test: Ethernet Crossover Wrap Cable
Refer to Ethernet Crossover Wrap Cable — Category 5 UTP
Copper Cable with RJ-45 Connectors on page 36-22.
Port/Stress (Full Duplex) test: Multi-mode fiber optic wrap plug
with MT-RJ connectors.
Port/Stress (Half Duplex) test: Multi-mode fiber optic cable with
MT-RJ connectors.
Port/Stress (Full Duplex) test: Single mode fiber optic wrap
plug with MT-RJ connectors.
Port/Stress (Half Duplex) test: Single mode fiber optic cable
with MT-RJ connectors.
continued on next page...