Backup Services Commands
Backing Up a Frame Relay PVC
Adding a backup service for a frame relay PVC is basically the same as for a physical port.
The only differences are that you must specify Primary Type as
specify a DLCI number. To add a backup service for a frame relay PVC:
1. Enter the
A screen similar to that shown below will be displayed:
2. When you first enter the command, the next unique index is assigned automatically, a
default description is created ("Backup" followed by the created index number), and
defaults for primary type, backup type, and all backup timers are created (as shown
above).
To backup a frame relay PVC, first change the primary type. Whenever the primary type is
changed, the menu will be redisplayed, because different parameters are needed to define
the primary type. An example is shown below:]
Page 34-6
command with no parameters, followed by
, and you must
, as shown below: