Ui To Cli Command Cross Reference; Hardware Commands; Hardware Table; Basic Switch Management Commands - Alcatel Omni Switch/Router User Manual

UI to CLI Command Cross Reference

UI to CLI Command Cross Reference
The chapters in this Users Guide are organized around the
into menus and sub-menus. Even though the Omni Switch/Router software has been changed
to boot up in the
commands are fully documented in the Text-Based Configuration CLI Reference Guide.
This section presents the key
with their
CLI
tables also list the partition management family to which the commands belong.

Hardware Commands

The hardware section of this manual set consists of Chapters 1 through 3. There are relatively
few commands in this section because these chapters cover the hardware elements of the
UI
switch. The commands defined in these chapters are listed in the Hardware Table beginning
on page 4-4.
1, "OSR
Chassis/Power
Supplies"
2, "MPX"
3, "OSR
Switching
Modules

Basic Switch Management Commands

The table beginning on page 4-5 summarizes the features supported in the
Chapters 4 through 11.
Page 4-4
mode, the Users Guide conforms to its original design. The
CLI
commands that are explained in this User's Manual along
UI
equivalents. Where the CLI commands support partition management, these

Hardware Table

No UI commands are defined in
this chapter.
commands as they are grouped
UI
N/A
CLI
N/A
GF-interface
GF-interface
and the for
UI CLI