Displaying The Command History Entries In The Mpm Log - Alcatel Omni Switch/Router User Manual

Displaying the Command History Entries in the MPM Log

The command displays a list commands executed since User Interface (UI) facility
logging was activated by the
page 10-6). To display this data, enter
at the system prompt. The following is a sample display.
The fields displayed by the
. The login name of the user who executed the command.
. The login type of the user who executed the command. If, for example, the user was
connected through the console port, "console" will be displayed. If the user was connected
through Telnet, on the other hand, then the IP address of that user will be displayed.
. The time that the command was executed.
. The actual text (up to 32 characters) that the user entered at the system prompt.
If you just want to display the commands executed
during the current session you can use the
command, which is described in Chapter 4, "The User
Interface."
Displaying the Command History Entries in the MPM Log
command (described in Configuring Switch Logging on
command are described below.
o Note o
Page 10-9