Wsx-Sc - Alcatel Omni Switch/Router User Manual

WSX-SC

The supports 4 or 8 serial ports, each of which can provide access rates from 9.6
WSX-SC
Kbps to 2 Mbps. The 4-port version is referred to as the
referred to as the
WSX-SC-8W
types of clocking (internal, external, and split). See WSX-SC Technical Specifications on page
3-30 for more information.
The can sense and auto-configure for any of five serial cable types (
WSX-SC
, and ). A
RS-530 RS-449
turned into a physical
cable. The board senses whether a
WSX-SC
Software in the switch allows you to configure parameters for the Frame Relay or Point-to-
Point Protocol ( ). Software commands allow you to view the status of the
PPP
tion at the board, port, or virtual circuit level. Extensive statistics are provided at each
WSX-SC
level. Software commands for Frame Relay are described in Chapter 29, "Managing Frame
Relay"; commands for
With the optional
HRE-X
second per module and up to 12 Mpps in a fully-loaded 9-slot chassis.
. The supports
WSX-SC
port is normally considered a physical
WSX-SC
device—for speed or clocking purposes— by plugging in a
DCE
DCE
are described in Chapter 30, "Point to Point Protocol."
PPP
you can increase routing performance to 1.5 million packets per
, and the 8-port version is
WSX-SC-4W
hardware compression and three
STAC
DTE
or cable is connected.
DTE
WAN Modules
, , ,
RS-232 V.35 X.21
device. It can be
DCE
connec-
WAN
Page 3-29