Display Alternate Peer Summary Information - Alcatel Omni Switch/Router User Manual

Field Descriptions
The following sections describe the fields displayed using the
. The address of the remote association.
IP
. The local interface address assigned by
, then the local address has yet to be determined.
. The stratum level of the remote peer. If this number is
synchronized.
The polling interval, in seconds.
. The reachability register of the remote association, in octal format. This number is
determined by the
NTP
. The currently estimated delay of this remote association, in seconds. This time is deter-
mined by the algorithm.
NTP
. The currently estimated offset of this remote association, in seconds. This time is deter-
mined by the algorithm.
NTP
. The currently estimated dispersion of this remote association, in seconds. This time is
determined by the
NTP

Display Alternate Peer Summary Information

The command displays a more detailed version of the
a slightly different output than the
summary information, enter the
to the following appears:
This table is identical to the
left side. A key for the symbols is provided below:
Indicates that the remote association was cast aside during the false ticker
detection.
Indicates that the remote association was accepted and not discarded by
+
the false ticker detection.
Indicates the remote association the switch is currently synchronizing with.
NTP
algorithm.
algorithm.
command. To display a list of peers that includes
command at the system prompt. A screen similar
command except for the symbols displayed on the far
command
to the remote association. If this address is
, the remote peer has not been
NTP Information Menu
command with
Page 12-17