Alcatel Omni Switch/Router User Manual page 146

Multiple User Sessions
For example, to end the session of the user connected to the console port (session 0) and let
him finish his current command, you would enter
at the system prompt. The system would then display something similar to the following:
The user losing the write privilege would see something similar to the following:
After the user with the session being killed has finished his work, he will be logged off. If the
user who was logged off had the write privilege, you will gain the write privilege and a
message similar to the following will be displayed.
You can use the command to confirm that you now have the write privilege.
In addition, the session number used in the command must be valid. If, for example, you
entered
and no user was connected to the modem port (session 1), the system would display the
following:
Also, you cannot use the command to end your own session. For example, if your session
number is and you entered
the system would display the following:
Instead, use the or command if you want to log out.
Page 4-36