Alcatel Omni Switch/Router User Manual page 935

5. You need to specify the
Frame Relay network. Only one virtual circuit may be specified for each Trunking service.
Enter a 4, an equal sign (=), and the
example below:
Press .
6. Specify the Group number or numbers that you want to be Trunked over the specified
virtual circuit. A separate virtual Trunk port is created for each Group you specify here.
Each Group and Trunk port maps down to a single virtual circuit. Enter a 5, an equal sign
(=), and the Group number(s). The example below includes Groups 5 and 6 in the trunk-
ing service:
Press .
7. Disregard the
8. Type
at the colon prompt (:) and press
service are saved.
for virtual circuit that will be used to trunk traffic over the
DLCI
number for the virtual circuit similar to the
DLCI
field. It does not apply to virtual trunk ports.
Configuring a Trunking Service
. All parameters for this bridging
Page 29-63