Viewing Snmp Statistics - Alcatel Omni Switch/Router User Manual

Configuring SNMP Parameters and Traps

Viewing SNMP Statistics

The command is used to display
activities since the last time the switch was powered on, or since the last Reset was executed.
It also displays a list of the current traps.
The command is listed on the
networking menu, see Chapter 25, "IP Routing." To display
ing command:
A screen similar to the following displays:
Total Packets
The total number of packets received and sent.
Bad Versions
The total number of
for an unsupported
Bad Community Names
The total number of
used an unknown
Bad Community Use
The total number of
an S operation that was not allowed by the
NMP
Page 13-8
SNMP
messages delivered to the switch
SNMP
version.
SNMP
message names delivered to the switch
SNMP
community name.
SNMP
messages delivered to the
SNMP
statistics. The command displays the
menu. For more information about the
statistics, enter the follow-
SNMP
protocol entity that were
SNMP
SNMP
protocol entity which represented
SNMP
community named in the message.
SNMP
SNMP
protocol entity that