Deleting Ports - Alcatel Omni Switch/Router User Manual

Deleting Ports

The command allows you to delete configuration information for a
you delete a this information, all WAN configuration parameters for the selected port revert
back to default settings.
To delete a port configuration, enter the following command:
in which is the slot number for the
board that you want to delete. For example, to delete port 1 on the
enter:
or
This system returns the following prompt to confirm the deletion:
Enter a to confirm the deletion or press
The
and port number. For example,
would be an incorrect usage, whereas,
would be correct.
board and
WSX
to cancel the deletion.
Note
command requires that you indicate a slot
The WAN Port Software Menu
port. When
WSX
is the port number on the
board in slot 2,
WSX
WSX
Page 28-37