Loading A File From The Primary Mpx - Alcatel Omni Switch/Router User Manual

Loading a File From the Primary MPX

Loading a File From the Primary MPX
The command loads a file from the primary and copies it into the secondary
MPX
. This command is only available and can only be run from a secondary . To use this
MPX MPX
command, enter , followed by a space, a slash ( ), the name of the flash directory,
another slash ( ), and the name of the file you want to transfer.
For example, to load the file from the directory on the primary to the
MPX
secondary you would enter
MPX
at the system prompt. After a brief moment, the file will be transferred into the secondary
The following would then be displayed.
MPX.
Page 6-17