Displaying Available Diagnostic Tests
Displaying Available Diagnostic Tests
The
command provides the user with a display of applicable tests for a particular slot
or for the entire chassis configuration. To display available diagnostic tests for a switching
module, enter the
command followed by the slot number for the module. The slot
number is an integer ranging from 1 to the number of slots in the chassis (3 for 3-slot Omni
Switch/Routers; 5 for 5-slot Omni Switch/Routers and 9 for 9-slot Omni Switch/Routers).
No default value is set and input must be provided at the time of entering the command. For
example, to display available diagnostic tests for the switching module in slot 3, enter:
at the system prompt. The following is a sample display.
To display all available diagnostic tests for the entire chassis, excluding slot(s) occupied by an
without an
, enter:
MPX
HRE
at the system prompt. The tests are displayed per slot module starting from slot module 1.
Page 36-15