Disabling Srtb For A Group - Alcatel Omni Switch/Router User Manual

6. Once you have selected the frame type, you are returned to the menu prompt. By reenter-
ing the command as you did in step 1, you can now see that SRTB has been acti-
vated for group 1, as shown:
The ring ID and default explorer frame are shown as well.

Disabling SRTB for a Group

To turn SRTB off for a group, enter the
where
example, to disable SRTB on Group 3, you would enter:
The following prompt appears:
Enter to disable SRTB. Once you have done this you are returned to the system prompt. To
view the changes to the group, enter the
following:
is the number of the group for which you want to disable SRTB. For
Configuring Source Route to Transparent Bridging
command as shown
command to display a screen similar to the
Page 17-45