Alcatel Omni Switch/Router User Manual page 260

Configuring the Syslog Parameters
LOG_EMERG
LOG_ALERT
LOG_CRIT
LOG_ERR
LOG_WARNING
LOG_NOTICE
LOG_INFO
LOG_DEBUG
Override internals
This field will force all syslog messages to use the default priority mask specified instead
of their own predefined priority masks.
Display internals
This field allows the user to display the task log level. Enter
menu below. If, for example, you wanted to change the priority mask
"warn" to "alert," you would enter
ately and you do not need to enter
then press
Console logging
Determines whether or not you want to see syslog messages on your console (terminal). If set
to yes, the messages will be displayed on either an
port or via a Telnet session.
Page 10-4
Syslog Priority Codes
0
1
2
3
4
5
6
7
. Note that this change will take place immedi-
for it to take effect. Type
to return to the main
FATAL system event
FATAL subsystem event
Problem, subsystem unstable
Problem, bad event,
recoverable
Unexpected, non-fatal event
normal but significant
condition
info
Internal debug messages
to display the sub-
,
menu.
terminal connected to the console
from
, or and