Deleting A Backup Service - Alcatel Omni Switch/Router User Manual

Viewing Backup Service(s) Configurations
With the command, you can view the configuration of either all backup services, or a
single backup service.
Viewing the Configurations of All Backup Services
To view the configurations for all backup services, enter the following command, followed by
, at the prompt:
A screen similar to that shown below will display:
Viewing the Configuration of a Single Backup Service (bsview Command)
To view the configuration for a single backup service, enter the
the index number of the backup service, followed by
below:
A screen similar to that shown below will display:

Deleting a Backup Service

Use the command to delete a backup service. Deleting a backup service will delete
the backup service configuration record. If a backup is enabled (e.g. due to the primary entity
being down), the backup entity will be brought down (e.g., for ISDN the call will be discon-
nected).
To delete a backup service, enter the
backup service, followed by
A screen similar to that shown below will display.
Enter or (the default value) to cancel the command. Enter
service
command followed by the index number of the
, as shown in the example below:
Backup Services Commands
command followed by
, as shown in the example
to delete the backup
Page 34-11