System Menu - Alcatel Omni Switch/Router User Manual

System Menu

The System menu contains commands to view or set system-specific parameters. To access
this menu, enter
at the prompt to enter the System menu. If you are not in verbose mode, press a question
UI
mark ( ) and then press
below.
All of the System menu commands—except for the
, and commands—are described in the following sections. The
, , and
command is described in Chapter 6, "Configuring Management Processor Modules."
The
in the
commands, a message will advise you to use the
command, and the
matically display. For more information on the
Configuration menu, refer to Chapter 4, "The User
Interface."
to display the commands in the system menu, as shown
commands are described in Chapter 4, "The User Interface." The
o Note o
, , and commands now appear as items
Configuration menu (displayed through the
UI
command). If you enter the
Configuration menu will auto-
UI
, , , ,
,
/ and
UI
System Menu
, , ,
/ , ,
Page 9-5