Displaying Static Bridge Addresses - Alcatel Omni Switch/Router User Manual

Alcatel switch/router release 4.5

Hide thumbs Also See for Omni Switch/Router:

Table of Contents

Bridging Commands

Displaying Static Bridge Addresses

You can view static bridge address information by entering the

command. To display the

information, enter the

command as follows:

is the number of the group for which you want to view static bridge

MAC addresses. For example, to view MAC addresses for Group 1, you would enter the

This command will display a table similar to the following:

As a variation of this command, you can enter the

command at the system prompt with no

group number. This will allow you to view the static bridge addresses on the currently

selected group. For information on selecting a group, see Selecting a Default Group on page

The descriptions for the variables in the table displayed with the

command are the same as

those in the table displayed with the

command. For details on these variables, see Config-

uring a Static Bridge Address on page 17-10.

Show Quick Links

Table of Contents

Do you have a question about the Omni Switch/Router and is the answer not in the manual?