Running Diagnostics On An Entire Chassis - Alcatel Omni Switch/Router User Manual

Running Diagnostics on an Entire Chassis

Running Diagnostics on an Entire Chassis
The command allows you to tailor diagnostic testing characteristics by module or for
an entire chassis. (Please refer to Configuring the Diagnostic Test Environment on page 36-16
for configuring tests for a single module.)
For example, to configure diagnostic tests for an entire chassis, enter:
A screen similar to the following will be displayed.
Select the number of the item you want to change. To change any of the values listed above,
enter the line number, followed by an equal sign, and then the new value. For example, to
change the port test type to
To update the values you have changed, enter
enter or
following message will be displayed.
If you cancel the
The fields displayed by the
1) Diagnostic Mode
Enter (the default) to set to normal diagnostics testing or
diagnostic testing. However, setting this field to
test.
Page 36-20
, enter:
, or press . If you enter
command, it will terminate and the following will be displayed.
command with the
. If you do not want to save the changes
, the change will be made and the
option are described below.
for a more detailed version of
requires more user intervention during a