Turn The Server's Monitoring Facility On Or Off; Display Data The Server's Monitor Routines Have Collected - Alcatel Omni Switch/Router User Manual

. The date of the last leap second insertion.

Turn the Server's Monitoring Facility On or Off

The Server Monitoring Facility keeps track of all
On, it is possible to display a list of all
the Monitoring Facility list of
Have Collected on page 12-31.
To turn the Monitoring Facility on or off, enter the
where is the status of the monitoring facility. For example, to turn the facility on,
enter:

Display Data The Server's Monitor Routines Have Collected

If the monitoring facility is turned on, you can display a list of all known
NTP
tions with general information using the
To display a list of collected monitoring statistics, enter the
prompt. A screen similar to the following is displayed:
This table is useful in establishing which entity is associated with the switch, and if entities
have formed associations independent of administrator configuration (for example, if a user
sets up an association with
. A scheduled leap second insertion less than a month away.
. A scheduled leap second insertion less than a day away.
. A scheduled leap second insertion less than two hours away.
associations. For more information on displaying
NTP
associations, see Display Data The Server's Monitor Routines
NTP
without notifying the network administrator).
NTP
association for this switch. When it is
NTP
command as shown:
command.
command at the system
NTP Statistics Menu
associa-
NTP
Page 12-31