Backup Services Commands
Modifying a Frame Relay PVC Backup Service
To modify a backup service for a frame relay PVC:
1. First, enter the
, as shown in the example below:
A screen similar to that shown below will display:
The command functions in a manner similar to the
ters that define the backup service may not be changed. These parameters are the:
• index
• primary type
• primary type subparameter
• backup type, and
• backup type subparameters.
Only the Description and Timer fields may be modified.
2. Once you are satisfied with the values, enter the
the prompt, as shown below:
A screen similar to that shown below will display:
Page 34-10
command, followed by the index of backup service, followed by
command, except the parame-
command, followed by
at