Clearing Backup Service Statistics - Alcatel Omni Switch/Router User Manual

Backup Services Commands
. The index number of the backup service.
. Enter a description of the backup service in this field. Your description may
consist of a maximum of 30 ASCII characters.
. This field shows the type of entity that will be backed up in the case of network
failure. The available options are and .
. The slot, port number, and DLCI number (if applicable) attached to this backup
service.
. This field shows the entity type to be used as a backup in the event of primary fail-
ure. At this time, the only available backup type is .
. The identification number of the peer that has the backup port for this service.
. The current state of the backup service. The options for this are ,
, , , .

Clearing Backup Service Statistics

To clear the statistics for a backup service, enter the command as shown:
where is the service index number assigned to the service when it was
created. For example, to clear the statistics for a backup service with an index number of 1,
enter:
A prompt similar the following displays:
Enter to clear the statistics.
Page 34-13