Display Server Statistics Associated With Particular Peer(S) - Alcatel Omni Switch/Router User Manual

NTP Statistics Menu
Field Descriptions
The following section describes the fields displayed using the
switch.
the data of the packet.
(either version 1 or 2).
unknown (most likely due to packet corruption).
ture (most likely due to packet corruption).
tion standards.
their point of origin. For information on setting restrictions, see Create Restrict Entry/Add Flags
to Entry on page 12-39.

Display Server Statistics Associated with Particular Peer(s)

The
for a peer, enter the
where
ple, to view statistics for a peer with IP address 131.218.18.4, enter the following:
A screen similar to the following displays:
Page 12-24
. The number of seconds the local
. The number of seconds since the last time the local
. The number of
NTP
. The number of
NTP
. The number of
NTP
. The number of
. The number of
NTP
. The total number of
. The number of
NTP
. The number of packets rejected because there were restrictions set on
NTP
command allows you to view statistics for a specific
command as shown:
is the address of the peer for which you want to view statistics. For exam-
server has been associated with the
NTP
packets received that had a corrupted stratum bit in
packets received that were of an older version of
packets received that were version 3 of
packets received for which the version was
NTP
packets received that did not fit the
packets processed.
NTP
packets rejected because they did not meet authentica-
command.
server was restarted.
NTP
NTP
.
NTP
packet struc-
NTP
peer. To view statistics
NTP