Alcatel Omni Switch/Router User Manual page 1071

14. To accept the default (
the factory-configured boot process, enter
used for internal debugging or Customer Service diagnosis:
•
•
•
•
•
•
•
A screen prompt similar to the following displays.
15. You can enter the default
16. The following screen prompt displays.
Enter an uppercase
displays.
17. Enter an to boot your switch.
) and perform a normal boot, press the
Load the local system symbols.
Do not autoboot.
Quick autoboot (no countdown).
Disable login security.
Use to get the boot parameters.
Use to get the boot image.
Use proxy arp.
parameters by entering them in the following format:
VLAN IP
to save any parameters you changed. The following screen prompt
Configuring a Switch with an MPX
. The following flags should only be
key. To restore
Page A-9