Alcatel Omni Switch/Router User Manual page 930

Configuring a Bridging Service
5. You need to specify the
one virtual circuit may be specified for each bridging service. There is a one-to-one
mapping between the Group and the virtual circuit. Enter a 4, an equal sign (=), and the
number for the virtual circuit. The example below includes the virtual circuit with
DLCI
16 in the bridging service:
DLCI
Press
6. Specify the Group number that you want to be part of this bridging service. Enter a 5, an
equal sign (=), and the Group number. Remember, by default a virtual circuit already
bridges on Group 1. The example below includes Group 3 in the bridging service:
Press
7. Indicate whether or not you want frames to be translated on this virtual bridge port.
When the
on frames before they are sent out to the Frame Relay network; enter an
select this option.
When the
first translated to the default Ethernet frame format for this port before they are sent out to
the Frame Relay network. Any
valid. Enter an
8. Type
service are saved.
Page 29-58
for the virtual circuit to include in this bridging service. Only
DLCI
.
.
MAC
at this field to select this option.
at the colon prompt (:) and press
field is set to , no translation is performed
field is set to
translations configured through the Switch menu are
. All parameters for this bridging
at this field to
, non-Ethernet frames are