Listing The Secondary Mpx Files; Transferring A File To The Secondary Mpx - Alcatel Omni Switch/Router User Manual

Listing the Secondary MPX Files

The command lists the files in the secondary
command; however, it lists files in the secondary
enter
at the system prompt. The following is a typical example.
The command lists every file in the secondary
bytes), creation date, and creation time. The three-letter file name suffix indicates the type of
file which includes configuration (
file suffix can be changed for both the primary and secondary
which is described in Setting the Load Suffix on page 6-14.

Transferring a File to the Secondary MPX

The command transfers a file in the flash memory of the primary
memory of the secondary
slash ( ), the name of the flash directory, another slash ( ), and the name of the file you want
to transfer.
For example, to transfer the file
secondary , for example, you would enter
MPX
at the system prompt. The following will be displayed.
If the file already exists on the target
displayed.
Use the
on page 6-12, to replace a file that already exists.
and
. To use this command, enter
MPX
from the
, something similar to the following message will be
MPX
command, which is described in Replacing a File on the Secondary MPX
Listing the Secondary MPX Files
module. This is similar to the
MPX
. To list files in the secondary
MPX
's flash memory followed by its size (in
MPX
), command ( ), and image (
with the
MPXs
directory on the primary
,
MPX
). The image
command,
to the flash
MPX
, followed by a space, a
to the
MPX
Page 6-11