Creating A New Group - Alcatel Omni Switch/Router User Manual

Alcatel switch/router release 4.5

Hide thumbs Also See for Omni Switch/Router:

Table of Contents

Creating a New Group

There are several steps involved in creating a new Group. Note that some steps apply only to

mobile groups. These steps are as follows:

1. Enter Basic Group Information, such as the Group number and type. This section starts on

2. Configure the Virtual Router Port (Optional). This section starts on page 19-21.

3. Enable/disable Group Mobility and User Authentication. This section starts on page 19-27.

4. Configure Virtual Ports. This section starts on page 19-28.

5. Configure AutoTracker policies (for mobile groups only). This section starts on page 19-

Routing Groups follow a slightly different procedure for their creation. You will receive

prompts during the procedure asking whether you want to create one of these special

Show Quick Links

Table of Contents

Do you have a question about the Omni Switch/Router and is the answer not in the manual?