Alcatel Omni Switch/Router User Manual page 973

Incoming Caller ID
The phone number reported by the Caller ID service, if available.
Peer Speed
The specified calling speed for this link. The options are 56000 and 64000 bits/second.
Inactivity Timer
Specifies the time period (in seconds) after which the connection will be terminated if it is not
carrying useful data. "Useful data" refers to forwarding packets (routing information) but not
encapsulator maintenance frames. Zero (0) specifies no disconnection due to inactivity.
Min/Max Duration
The minimum and maximum duration of a call, in seconds, starting from the time the call is
connected until the call is disconnected. Zero (0) means "unlimited."
Call Retry
The number of calls that may be made to a non-responding address. A count of zero (0)
means there is no limit to the number of call retries.
Displaying Information for a Specific WAN Link
To view detailed information on a specific WAN Link, you must enter its Link Index with the
command. Different parameters will be displayed based on the type of link being used.
Example of an ISDN Link
To examine an ISDN link, for example, Link 1, you would enter following command:
A screen similar to the following displays:
The fields on this screen provide the same information as those on the
Adding a WAN Link on page 31-3 for descriptions of each of these fields.
Viewing WAN Links
screen. See
Page 31-13