Alcatel Omni Switch/Router User Manual page 259

Default facility code
The facility code is used to identify which sub-system generated the syslog message. Note that
this code is used only as a default for tasks that do not have a facility code. See the table
below for a list of the facility codes. The default is
LOG_KERN
LOG_USER
LOG_MAIL
LOG_DAEMON
LOG_AUTH
LOG_LPR
LOG_NEWS
LOG_UUCP
LOG_CRON
LOG_LOCAL0-7
Override internals
This setting will force all syslog messages to use the default facility code specified in
instead of their own predefined facility codes.
Default priority mask
The mask for the priority code. Indicates the type of syslog message. Note that this mask is
used only as a default for tasks that do not have a priority code. Priority codes for syslog
messages are usually hardcoded. The following table is a list of priority codes.
.
Syslog Facility Codes
Messages generated by the kernel
Message generated by random user processes
The mail system
System daemons
The authorization system
The line printer spooling system
Reserved for the USENET system
Reserved for the UUCP system
The cron/at facility
Reserved for local use
Configuring the Syslog Parameters
Page 10-3