Viewing Udp Relay Statistics - Alcatel Omni Switch/Router User Manual

Viewing UDP Relay Statistics

Use the command to display statistics about configured
command is listed in the IP submenu. For information about other IP commands, see Chap-
ter 25, "IP Routing."
The screen display for
The fields are defined here.
. The number assigned by the switch to the
were configured.
. The well-known
is 67/68. This number is manually configured for generic services.
BOOTP/DHCP
. The total number of packets received by the relay for the indicated service.
. The average rate, in packets per second, that packets were received for the
indicated service since the last time the
. The total number of packets transmitted from the relay for the indicated service.
. The average rate, in packets per second, that packets were transmitted for
the indicated service since the last time the
. The
UDP
. The
Forwarding are configurable for each type of relay.
VLANs
. The number of packets forwarded to the indicated
statistics is similar to the following:
UDP
port number associated with the type of service. For example,
UDP
port number associated with the service
address of the
IP VLANs
relays. The
UDP
service, in order that the services
UDP
command was entered.
command was entered.
to which the indicated relay is forwarding.
.
VLAN
Viewing UDP Relay Statistics
Page 26-23