Forwarding Vlans For Nbns Relay - Alcatel Omni Switch/Router User Manual

Forwarding VLANs for NBNS Relay

At least one forwarding
NBNS on page 26-14) must be configured for
To select forwarding
1. On the command line of the UDP Relay Configuration screen, enter the following:
A screen similar to the following displays:
2. Enter the item number of the group/
the groups/
VLANs
3. Press to return to the command line for the UDP Relay Configuration screen.
4. Enter to save the changes.
To deselect forwarding
1. On the UDP Relay Configuration screen, enter
The Available/Selected VLANs screen displays.
2. Enter the item number of the group/
the groups/
VLANs
3. Press
to return to the command line for the UDP Relay Configuration screen.
4. Enter to save the changes.
(or a next-hop address as described in Next-Hop Addresses for
VLAN
for relay:
VLANs NBNS
VLAN
you want to select.
:
VLANs
VLAN
you want to select.
relay.
NBNS
that you want to select. Repeat this step for all
that you want to select. Repeat this step for all
NetBIOS Relays
Page 26-15