The User Interface - Alcatel Omni Switch/Router User Manual

The User Interface

The User Interface
This chapter documents User Interface (
For documentation on Command Line Interface (
options, see the Text-Based Configuration CLI Reference Guide.
Simple encapsulation options can be configured through the
More advanced encapsulation options can be found in the commands under the
Essentially, the forwarding code is now capable of applying the transformation function per
protocol per encapsulation per port for flooded/mcast traffic and per protocol per encapsula-
tion per destination MAC address for forwarded unicast traffic. The old interface provides a
small subset of these possible port translation options.
Page 18-16
) commands to configure encapsulation options.
UI
o Important Note o
In Release 4.4 and later, the Omni Switch/Router is
factory-configured to boot up in
Interface) mode, rather than in
mode. See Chapter 4, "The User Interface," for docu-
mentation on changing from
) commands to configure encapsulation
CLI
(Command Line
CLI
(User Interface)
UI
mode to mode.
CLI UI
commands.
menu.