Listing Switch Files - Alcatel Omni Switch/Router User Manual

Listing Switch Files

You can use the command to list the files in the primary
command, enter
at the system prompt. A screen similar to the following will be displayed.
The command lists all the files in the current working directory of the primary
memory, followed by its size (in bytes), creation date, and creation time. The three-letter file
extension indicates the type of file. Examples include configuration (
( ), image ( ), Programmable Gate Array (
number of bytes of free memory in flash memory.
If you are connected to the primary
to display the files in a secondary
command, which is further detailed in Chapter 6,
"Configuring Management Processor Modules."
's flash memory. To use this
MPX
), etc. The
o Note o
and you want
MPX
, use the
MPX
Listing Switch Files
s flash
MPX'
and ), command
command also lists the total
Page 7-3