Udp Relay Hardware/Software Support - Alcatel Omni Switch/Router User Manual

In non-source route environments,
ring stations. Token ring stations may have packets with
not enabled on the station.
802.3 anywhere along the path between the client and the
LANE
should be enabled on the first non-token ring port in the path. The number of bridges on the
path does not matter.

UDP Relay Hardware/Software Support

The UDP forwarding feature has the following hardware/software support:
• relay is supported on any Omni Switch/Router (OmniS/R).
UDP
• To relay DHCP requests from authentication clients in a default group to a DHCP server in
an authenticated group, the
command described in this chapter. See the Authentication Services chapter of the
Switched Network Solutions User Manual for information about the
Page 26-2
stripping may be required if
RIF
stripping is required if there is bridging to Ethernet,
RIF
command must be used in addition to the
clients are token
DHCP
even though source routing is
RIFs
server.
DHCP RIF
, or
FDDI
stripping
command.