Modifying a Backup Service
With the
command, you can modify:
• A backup for a physical port
• A frame relay PVC.
Modifying a backup for a Physical Port
To modify a backup service for a physical port:
1. Enter the
. An example is shown below:
A screen similar to that shown below will display:
The command works in a manner similar to the
that define the backup service may not be changed. These parameters are the:
• index
• primary type
• primary type slot, port, and dlci
• backup type, and
• peer ID.
Only the description and startup, activate, and restore timer fields may be modified.
2. Once you are satisfied with the values, enter the
shown below:
A screen similar to that shown below will display:
command, followed by the index of the Backup service, followed by
Backup Services Commands
command, except the parameters
command, followed by
, as
Page 34-9