Alcatel Omni Switch/Router User Manual page 817

This example prompt asks if you want to enable spoofing on all WAN routing services. If
you had entered a specific Group number, the prompt would refer to that particular
Group.
Enter to enable IPX Watchdog Spoofing.
5. IPX Spoofing will then become active. A message will appear indicating that IPX Watch-
dog Spoofing is enabled, either on all WAN routing services, or for a specific Group:
Disabling IPX Watchdog Spoofing
Follow the steps below to disable IPX Watchdog Spoofing.
1. Enter .
A screen similar to the following displays:
Enter if you do want to see the current IPX spoofing status. Enter
) if you entered this command by mistake or if you don't need to see the current
status.
2. A screen similar to the following displays:
Enter a Group number if you want to disable IPX spoofing for that particular Group.
Or, press
3. The following prompt displays:
Enter (or just press
4. The following prompt displays:
This prompt requires you to verify that you want to disable spoofing. This example
prompt asks if you want to disable spoofing on all WAN routing services. If you had
entered a specific Group number, the prompt would refer to that particular Group.
Enter to disable IPX Watchdog Spoofing.
5. IPX Spoofing will then become inactive. A message will appear indicating that IPX Watch-
dog Spoofing is disabled, either on all WAN routing services, or for a specific Group:
to disable IPX spoofing for all WAN routing services.
) to proceed to disable IPX spoofing.
Configuring IPX Watchdog Spoofing
(or just press
Page 27-29