Table of Contents
Advertisement
Viewing Current Remote Statistics
You can view remote statistics for the current 15-minute interval on a single port by entering
the following command
where
is the slot number where the board is located, and
the board on which you want to view statistics. For example, to view remote 15-minute inter-
val statistics for Port 2 on the board in slot 5, enter
A screen similar to the following displays:
Definitions of the fields and columns in this display are the same as those used for the
command. See Viewing Total Local Statistics on page 33-17 for an explanation of these statis-
tics.
Viewing Remote Historical Statistics
The
command allows you to display remote historical statistics for the past 96 15-minute
intervals. Enter the following command
where
is the slot number where the board is located, and
the board on which you want to view statistics. For example, to view remote historical 15-
minute interval statistics for Port 2 on the board in slot 5, enter
A screen similar to the following displays:
Definitions of the fields and columns in this display are the same as those used for the
command. See Viewing Total Local Statistics on page 33-17 for an explanation of these statis-
tics.
Viewing T1 Remote Statistics
is the port number on
is the port number on
Page 33-21
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Omni Switch/Router and is the answer not in the manual?